Jotun Protective Coatings
Corrosion protection that extends the time between maintenance
Steel in the North Sea and in industry is exposed to seawater, chemicals and mechanical wear. A correctly built system from primer to topcoat gives longer service life, fewer maintenance shutdowns and lower total cost.
01
What must the steel withstand?
Pick an environment or job to see the products made for it. We put the whole system together from primer to topcoat to the specification, for example NORSOK M-501.
Protective from Jotun · Showing 11
Epoxy
Penguard Express
Epoxy primer for long-term steel protection, optimised for new construction.
- Fast dry-to-recoat
- Fast dry-to-handle
- Optimised for new construction
Epoxy
Penguard Universal
Fast drying, abrasion resistant universal epoxy.
- Fast drying
- Abrasion resistant
- Multipurpose
Zinc epoxy
Barrier
Zinc-rich epoxy primer for highly corrosive environments.
- For highly corrosive environments
- 80% zinc dust
- Fast dry-to-recoat
Inorganic zinc silicate
Resist 86
Zinc ethyl silicate primer for severe corrosive environments.
- 85% zinc dust content
- Fast dry-to-recoat and dry-to-handle
- NORSOK compliant
Epoxy mastic
Jotamastic 90
Surface-tolerant, abrasion resistant epoxy mastic for maintenance and repair.
- Surface tolerant
- Tintable
- Long lifetime in highly corrosive environments
Epoxy mastic
Jotamastic 85
Robust, multi-purpose surface-tolerant primer with short overcoating intervals.
- Surface tolerant
- Easy and efficient to use
- Can be applied at sub-zero surface temperatures
Polyester
Baltoflake
Mechanically resistant coating with exceptional lifetime in extreme conditions.
- Close to 40 years of North Sea experience
- Extremely fast curing
- NORSOK compliant
Polyurethane
Hardtop XP
Classic polyurethane topcoat with good durability.
- Good durability
- Excellent application properties
Polyurethane
Hardtop Flexi
Polyurethane that can go direct to metal, in one coat.
- Direct to metal
- High film thickness for improved corrosion resistance
- One coat possible
Silicone acrylic
Solvalitt
Heat-resistant topcoat for high temperature areas.
- Heat resistant up to 600 °C
- 14 high temperature stable colours
Acrylic
Jotatop Pro
Two-component acrylic topcoat, free of isocyanates.
- Fast drying and hardness development
- Very good weather resistance
- Isocyanate free
02
How a system is built
A protective system is several layers that each do their own job. Which products and thicknesses are used depends on the specification and the environment.
01
Topcoat
Protects against sun and weather, and gives colour and gloss.
- Hardtop XP
- Hardtop Flexi
- Jotatop Pro
02
Intermediate coat
Builds film thickness and a tight barrier against moisture and salt.
- Penguard Universal
03
Primer
Bonds to the steel and gives the corrosion protection at the base.
- Barrier
- Resist 86
- Penguard Express
- Jotamastic 90
04
Steel
Prepared to the requirement in the specification, often blast cleaned.
What you get
Less maintenance
The right system and film thickness extend the interval between maintenance rounds.
Built for Norwegian requirements
We help you with systems that meet NORSOK M-501 and client specifications.
Also for on-site maintenance
Surface tolerant products that can be applied by brush and roller where blasting is not possible.
Documented workmanship
With our own FROSIO inspector we can follow up and document the work.
Not sure which system you need?
Describe the substrate, environment and requirements, and we will recommend a system and send you a quote.
